Translate

PSI-Polymer Systems Inc.’s Continuous Screen Changers Perform Flawlessly for Challenging Food Industry Candy Application (April 8, 2014)

PSI-Polymer Systems Inc.’s Continuous Screen Changers

Conover, NC—PSI-Polymer Systems has recently sold a modified continuous screen changer to a leading U.S.-based candy producer for use in a challenging food extrusion application. The ability for the screen changer to perform well in this unique application highlights the customization and solution oriented abilities that PSI prides itself on.

This purchase marks the fifth PSI screen changer this customer has purchased for their food process. The first ones for this application went into service in 2011. “This particular food application was new for continuous screen changers back then. There were trials that had to be run and validation procedures met, but more than that, months of in-service operation had to be performed to make certain that the metallurgy would stand up over several years and rigorous FDA conditions upheld without fail,” said Don Macnamara, General Manager of PSI-Polymer Systems Inc. “Whether it’s plastics, food, or other materials, it’s our job to adapt technology to the process.”

The unique challenges of running a food application with a machine generally used for plastic extrusion are far more demanding, and include the ability to thoroughly clean any area where bacteria might grow; accommodate water wash down and be watertight to facilitate this washing; be built entirely of stainless steel to resist rusting; use FDA approved paint, and have exterior surfaces free of nooks and crannies that can catch and hold food and cause bacterial growth.

PSI’ s customer was clear that the process could not tolerate any machine downtime for filter changes, meaning the screen changer had to be continuous to allow for an automatic switch from a clogged or potentially contaminated screen to a new, clean screen without shutting the line down. PSI jumped at the challenge and created a screen changer that met all of these process and design requirements and is now proven over several years of operation.

The PSI screen changer is a continuous design with easy to change screen packs. It is made of 420 stainless steel to allow for heat-treating while also resisting corrosion and rusting. Additionally, as was required, the screen changer is watertight and has the ability to process the extremely high viscosity of this food application.

Hydraulic slide plate screen changers have traditionally been used in the food industry, for batch applications such as cereal, corn chips and others. However, the PSI continuous screen changer accommodates 24/7 continuous extrusion operations and allows for an automatic, easy switch of screens which eliminates downtime and creates a system that is both more efficient and less susceptible to contamination than the standard hydraulic version.

“This is an exciting application for us here at PSI,” said Glenn Woodcock, President of PSI-Polymer Systems. “The challenge of developing a screen changer that meets all the standards of the food industry while still increasing efficiency and value for the customer is something we believe not many companies in this business could have overcome. We at PSI pride ourselves on our ability to innovate and push the boundaries, and we have done so yet again.”

About PSI-Polymer Systems, Inc. PSI-Polymer Systems, Inc. is a U.S. supplier of polymer filtration equipment, gear pumps, static mixers, divert valves, and engineered system solutions for the plastics extrusion, polymer processing and recycling industries. All PSI machinery and equipment is designed and manufactured in the U.S.A to ISO-9002 standards. For more information on PSI-Polymer Systems contact:

  • Don Macnamara, General Manager
  • 1703 Pineview Street SE
  • Conover, NC 28613 U.S.A.
  • Ph: (828) 468-2600
  • FAX: (828) 468-2610

Download as PDF

← Back to Press Releases